Jinvoo SM-SW101-3 Switch teardown
Sometimes people want to see what the inside of a device looks like… so do I! 🙂 So I took apart my new Jinvoo SM-SW101-3 and took some pictures:
I was able to flash it to tasmota easily with tuya-convert and connect it to Home Assistant. :yay:
There’s a template for it too so configuration was a breeze and shortly after I was able to integrate it to home assistant and set up some automations to turn on scenes – I’ve only used two of the three buttons so far so I’ve still got one to play with!
As far as I can tell, the button LEDs are linked to the relays; they cannot be lit independently of the relays. I don’t have anything connected to the relays at the moment, so they click (and draw a little power) when the button is pushed.
With tasmota flashed I measured about 0.5W with all switches off and about 1.3W with all relays on.
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.